Level 2 Tesla Charger(Wireless WiFi APP), 240V, 32 Amp, NEMA 14-50 Plug, 25ft Cord – Portable/Home NACS Connector Electric Car(EV) Charger for Tesla – Compatible with Tesla Model X/Y/3/S

❤ [6X Faster Charging & Compatible with All Tesla Models S/X/3/Y or Any EV that Uses the North American Charging Standard (NACS)]: Say goodbye to slow level 1 ev charger and enjoy 6X faster charging. The AIMILER ev charger is ETL, FCC and CE Listed, Meets the Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL 2251, UL1998 and UL 2594.
❤ [Question & Answer: Why can’t find the device on app? or Can’t find the device after changing phones]: Solutions: 1. Confirm your phone to connect with the 2.4Ghz wifi, not connect the wifi whose name has 5G suffix; 2. Turn on the wifi and bluetooth of the phone; 3. Factory Reset/Wifi reset: Pull out the charging gun, simultaneously long press the Ⓐ button and time button on the product screen until it shows “Factory Reset/Wifi reset”. 4. Re-start and add your device.
❤ [Working Voltage 200-260V, ONLY Fits for Nema 14-50 Plug-in Outlet]: Fits for: 200V-260V, suggest 220V or 240V(32A). Kindly Note: The adapter is needed if your home outlet is not Nema 14-50 plug-in socket. If the input voltage is under 200V, the safe current(Amperage) may be adjusted below 32A automatically because part of the electric cars such as Tesla will be adapted to the appropriate current according to the voltage change, you can reset by your ev charger directly.
❤ [Operating Regulations]: Plug-in Socket: Only works with Nema 14-50 plug-in socket; [Doesn’t charge or shows “No Plug error”]: Open your APP and set the charging mode to “Real-time charging”. Or you can “Wifi reset/Factory Reset” (Pull out the charging gun, simultaneously long press the Ⓐ button and time button on the product screen until it shows “Factory Reset”. Then wait 3-8 seconds or restart your device and charge normally.)
❤ [Up to 7.68kWh High Speed Charging & Adjustable Amperage from 16A to 32A]: Maximum current output of 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker. (Our charger is built-in CCID20 leakage detection and protection device, meets the safety criteria defined by UL2231-1/-2, it is no need to install additional GFCI breaker for NEMA 14-50 receptacles.)
❤ [2 Operating Modes: Touch Button Control or APP Control, Real-time Monitor and Appoint The Charging Start Time]: The LED Screen Clearly show the Amperage, charging speed, input voltage, delay time, etc. For the touch buttons: 1. Pull out the charging gun, otherwise the touch buttons will no respond; 2. Long press “Ⓐ” or “Time” button to adjust the amperage from 16A to 32A freely; 3. Switch the charging mode by APP directly. (You can do “factory reset” if doesn’t charging.)
❤ The APP allows your vehicles to be charged during off-peak period by setting the charging time. Check the charging cost, history, fully-charged notification, track the charging status.❤ [Wi-Fi Reset/Factory Reset Function, Add New Device Quickly]: If you can’t find your device or you have replaced a new phone, just pull out the charging gun, simultaneously long press the Ⓐ button and time adjustment button on the product screen until it shows “Factory Reset”, then re-start your device.
❤ [Nema Type 4 Protection Degree & 25ft Long Bold Cable]: Approved by NEMA Type 4, the Aimiler ev charger has a certain extent of IP66 waterproof. (We don’t suggest install in the direct sunlight or exposure rainy day.) Equipped with 25 feet military grade charging cable, the drop-resistant plug endures over 10,000 charges, super durable.